PFC 1000 GMA 1347 Audio Panel




The PFC 1000 is a Garmin G1000 GPS simulator. The hardware and firmware are made by PFC. The firmware does not emulate the G1000; it merely sends messages to simulation software regarding the controls (knobs and buttons). The PFC 1000 Audio Panel simulates a Garmin GMA 1347.

Note: There are two processors on this panel. As usual the processors are each on a small board marked "USB Slave". One is actually the master to the other. The Master processor connects to USB and talks to the slave through circuits on the PC board. The Slave processor normally does not connect to USB, but you can use the USB connection to perform field upgrades, just like the Master. However the Slave does not need a program jumper to put it into programming mode.

Right-click and select "Save Target As" (Internet Explorer) or "Save Link As" (FireFox) to download either of these files. Otherwise your browser will probably just display the raw contents. Your browser may try to save it as a text file, if so you'll have to rename it.
Bonus links:






Some simulators that may use G1000 panels

Back to PFC 1000